Nursery Pens
Construction & Specifications for Standard Nursery Pen: Legs constructed of 2" x 2" x 3/16" Angle with side panel and end panel brackets and floor rack bracket (can be built to any height on order). Side and End Panels are constructed of 3/8" x 1" Flat Bar at top and bottom with 5/16" Rod welded vertically on 2" centers. Bottom Rack made of 1/4" x 1-1/2" Flat Bar turned on edge for strength. Requires no bolts to fasten to legs. Built to accommodate woven wire, Filter-Eeze® vinyl, or Tenderfoot NS® coated flooring.
Construction & Specifications for Heavy Duty Nursery Pen: Legs and Floor Rack are same as above. Side and End Panels are constructed 7/8" Round Solid Bar at top and bottom with 7/16" Rods welded vertically on 2-1/2" centers.
Nursery Pens can be built to accommodate most all types of feeders, Single or Double Sided.
Horizontal 
Vertical
Gestation Stalls
See the Sow Operated Feed Stall for the best alternative to total confinement.
Low-Back Gestation Stall
Frame made of 7/8 inch solid rod with 5/8 inch solid rod inserts. 24 inches wide
on center of frames. Other widths available. 2-3/8 inches O.D. feed
tube. Doors made of 3/4 inch solid rod frame with 5/8 inch solid rod inserts.
Boar Stall
Frame made of 7/8 inch solid rod with 5/8 inch solid rod
inserts. 26 inches wide on center of frames. Other widths available.
2-3/8 inches O.D. feed tube. Doors made of 3/4 inch solid rod frame with 5/8 inch
solid rod inserts.